How to Mount a Wall Hanging Electric Fireplace
There are a variety of ways to mount an electric fireplace. Some electric fireplaces can be partially or fully integrated into the wall to create a a flush and finished appearance.
Some can be hung on the wall to create a piece. They can be built into a fireplace mantel.
1. Easy to Install
A wall-mounted fireplace can be a great way to add warmth and comfort to your home. This is particularly true if you do not want the hassles associated with a gas- or wood-burning fireplace. They are also simple to install and can make them popular with homeowners. When you are putting up your fireplace, remember the following points.
Make sure you have the correct tools. A few basic tools should be enough to get the job done however, you may require more when your project is more complex. Secondly, make sure your fireplace is compatible with the area you're planning to put it in. A lot of electric fireplaces come with a layout that shows you where to put the brackets on the wall, however you'll need to make your own judgement on how high or low to position it. You should also check whether the space you're installing it in is safe for an electric fire.
Once you've secured the mounting brackets, mount the fireplace on them. It can vary from one fireplace to the next, but there will likely be an ledge on the lower part of the fireplace that it rests on, as well as spots on either side where you can connect the brackets. Some electric fireplaces come with a back which you can attach to the brackets to secure it in the correct position.
If you're installing your electric fireplace in a wall or other enclosed space, you'll need build a frame around it to shield the unit from fires and other damage. It's recommended to employ an electrician to assist you with this step if you're not at ease doing it yourself.
Then, connect the fireplace and test it to ensure that it is working properly. It is a good idea to verify all controls including switches, buttons, and switches for the flame brightness, heat settings and more. If something doesn't seem be working, switch off the fireplace's power and contact an electrician licensed to assist. The electrical components that are damaged can be an ignition risk and shouldn't be played with by anyone who isn't an electrician.
2. Space Saver Space
Sconces, photographs mirrors, and sconces that you place on your walls for ambience are wonderful but they're not always able to make an impact. If you're looking for a great method to enhance the appearance of your home without having to spend an enormous amount of money, you should consider buying an electric fireplace that is wall-mounted instead.
They are designed to occupy very tiny wall space, which makes them ideal for people who live in apartments, condos or small houses. You can place them in the wall to create an integrated look or mount them on a freestanding fireplace, based on what you like. They don't require a chimney and don't obstruct as much into the room as traditional electric or wood fireplaces. This means you can make the most of your floor space for other things.
Apart from saving floor space, the most attractive aspect of this kind of fireplace is that it's more energy efficient than traditional fireplaces. This is because they don't produce the same amount of heat and are made of safer materials. They also don't require to be vented, which makes them a great choice for homes with small children or pets.
Fireplaces are available in a wide range of styles and designs that can fit into any decor. Some are sleek and modern while others have a more rustic or traditional appearance. You can also find models with hand-painted log and ember beds for a more realistic look. You can also choose from a range of colors to match your interior.
Before you buy one, be sure to check the size of the area where you plan to hang it. Also, you should check the output of heat to ensure that it can effectively warm the room. You might also want to choose a model with remotes or other safety and comfort features. Make sure you follow the directions to install your fireplace correctly to ensure that it remains safe and secure. It is recommended to hire an expert in case you don't know how to accomplish the task.
3. Large areas are heated
Unlike gas or wood-burning fireplaces, which require costly chimney and venting systems, electric fireplaces provide a clean, efficient solution for heating up living spaces. They can be installed on walls, in a built-in bump out or as a freestanding piece of furniture. They are also compatible with flat screens because they don't produce smoke or ignite. Electric fireplaces come in a variety of styles from traditional mantels to modern linear units.
Depending on the type of fireplace you select The fireplace can be controlled using traditional electric coils that are forced by fans or infrared technologies that convert electricity into heat. Both can warm rooms up 400 square feet. If you choose one that has an ambient LED light display to simulate a real flame, it can be used as a mood lighting fixture without heating the space.
Electric fireplaces are cheaper to maintain than traditional wood-burning fire places because they don't have real flames. Electric fireplaces do not provide heat to walls like a masonry unit does. You should limit the amount of time you use the heating feature to avoid increasing your cost of energy.
The majority of the energy they draw is from their infrared heating element which generates warmth on a wall behind the glass. The area around the flames is cool which makes them a safe option for families with young children who might be drawn to the fire-like simulation.
As with other electrical appliances, electric fireplaces should be plugged into a circuit that isn't serving other devices Kuefler suggests. The heating function typically draws up to 1,500 watts, which is more than enough to overload an existing household circuit.
If you decide to go with an independent model that is in a straight line against the wall, you can install it yourself using a couple of common household tools and a bit of expertise with power tools. If you want to mount a concealed unit on the wall, you might need to engage an electrician to complete the electrical connection. This is because it requires more intricate framing and patching the drywall. No matter what type you choose, make sure it is in keeping with your home's decor and that there is enough space for heated air or infrared rays to flow through the space.
4. Easy to Clean
Wall-mounted electric fireplaces are less maintenance and upkeep compared to traditional gas or wood fireplaces. This is because they do not generate a flame, which means there isn't any ash build-up. However this doesn't mean that they don't need to be regularly cleaned.
Keep your fireplace's electric appliance clean, well-maintained, and it will perform better, look better, and last longer. It also helps avoid any potential issues that might arise from dust or dirt accumulation over time.
It is essential to read your user guide prior to cleaning your electric fire. This will ensure that you're taking all the necessary precautions to avoid potential accidents or damages.
One of the first steps is to turn off and unplug your fireplace. This will help prevent any electric shocks that may occur while you are cleaning. If your electric fire is wired to your home shut it off at the plug. If it is wired to the electrical system of your home then disconnect it from the fuse panel.
Next take a soft cloth or towel to gently wipe the glass panel. Remove smudges and fingerprints from the glass surface can make a significant impact on the appearance of your fireplace. Avoid using electric wall fireplace as they can harm the glass and leave unwelcome marks. After you've wiped the glass, you should wash the glass with clean water and dry it thoroughly to avoid streaks or spots of water.
After you've cleaned the glass, it's time to clean the interior of your electric fireplace. If your fireplace has a removable front access panel, remove it with care, following the steps in your user's manual. Once the front panel is removed it is possible to make use of a soft brush or a vacuum with a brush attachment to remove any dust that has accumulated around internal components, such as the fake logs and embers, LED lights, or flame reflectors. You can also use compressed-air to blow dust out of hard-to-reach places or restricted spaces.
Also, be sure to inspect all electrical connections regularly for signs of wear and tear. If you find any frayed or loose connections, it's best to replace them by an experienced electrician to avoid any safety hazards.